This is the best fuel management system I have ever seen. It will handle anything you can throw at it in the way of a fuel curve. You can build up to 3 different curves which can be changed in a matter of seconds by pressing a single button. Has 5 timer output functions as well. No PC/Laptop or engineer required. $1600.00 USD (BDK valve extra)
We CNC these Adjustable AIr Bleed assemblies from 6061 billet aluminum. We use a large knurl on the adjuster screw for easy adjustments. Threaded end is 1/8" NPT thread. These are installed in the injector or manifold to adjust cylinder temperatures.
Our new billet throttle assembles have a built in adjustable wide open throttle switch which can be used to activate most timer systems. We designed the assembly to activate the WOT switch when the rider comes off idle instead of full open for faster response times. Available for 2 or 4 cable systems.
Our 3-Way Fuel Shut-off Kit redirects the fuel flow back to the tank when activated to prevent dead-heading the fuel pump.
We also positioned the WOT switch to activate coming off idle rather that wide open to ensure that management systems get turned on as soon as possible.
The throttle shaft rotates on sealed roller bearings instead of the body itself. This ensures a positive seal between the shaft and throttle body, eliminates wear in the throttle body and provides very smooth operation.
Throttle bodies are Billet Aluminum, and available in sizes of 2 1/2", 2 5/8", 2 11/16", 2 3/4", 2 7/8" & 3.0" in diameter.
One piece throttle bodies and linkage arms are CNC machined of Billet Aluminum providing a safe and light weight unit. These throttle bodies come complete with Barrel valve, billet throttle cable bracket, and all necessary linkage.
This is one of our fuel distribution blocks set up with the mounting bracket, On/Off safety valve and deadman cable and guide attached.
We are a dealer for Waterman and Kinsler. We keep a large selection of fuel system parts and plumbing in stock including nozzle lines, nozzles, jet cans, barrel valves, pumps, distribution blocks, AN fittings and hose.
This is our 15 Degree "Shower head" fuel distribution block which will also accept the on/off safety valve, mounting bracket and deadman as well.
This is a close up of our bracket and fuel block, which mounts on the center case bolt between the cylinders. It comes undrilled so the customer can locate any number of nozzle lines or pressure sensor in any location.